Home Elevator

1. Low noise and stable in running 2. Advanced VVVF control system 3. Top quality with low price 4. ISO9001&14001&OHSAS18000

Home Elevator

  

Introduction

Compared with the usual machine room, GAIPU small machine room passenger lift adopts the reasonable civil engineering layout, the machine room covers the equal area as that of the well. It saves the machine room space, reduces the outline influence from the machine room towards the construction. It can adapt to the buildings which has special requirements towards the outline appearance. It not only cuts down the constructio cost, but also is helpful to excite the inspiration of the construction designers to create the artistic buildings on after another.

Standard Configuration                                                   

  

  

  

Standard Function

 

 

VVVF Drive	Motor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and stop and gain the sound comfort.
VVVF Door Operator	Motor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/stop.
Independent Running	The lift can not respond to outer calling, but only respond to the command inside the car through the action switch.
Automatic Pass Without Stop	When the car is crowded with passengers or the load is close to preset value, the car will automatically pass the calling landing in order to keep maximum travel efficiency.
Automatically Adjust Door Opening Time	Door-open time can be automatically adjusted according to the difference between landing calling or car calling.
Re-open with Hall Call	In the door shutting process, press reopen with hall call button can restart the door.
Express Door Closing	When the lift stops and opens the door, press door-shut button, the door will be closed immediately.
Car Stops and Door Open	The lift decelerates and levels, the door only opens after the lift comes to a complete stop.
Command Register Cancel	If you press the wrong floor command button in the car, twice continous pressing of same button can cancel the registered command.
Direct Parking	It compeletely accords with distance principle with no crawling in the leveling. It greatly enhances the travel efficiency.
Lighting Screen Protection	In the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects.
Designated Stop	If the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor.
Overload Holding Stop	When the car is overload, the buzzer rings and stops the lift in the same floor.
Anti-stall Time Protection	The lift stops operation due to slippery taction wire rope.
Start Protection Control	If the lift does not leave door zone within the designated time after it gets started, it will stop the operation.
Inspection Operation	When the lift enters into inspection operation, the car travels at inching running.
Fault Self-diagnosis	The controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation.
Repeated Door Closing	If the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated.
Up/down Over-run and Final Limit Protection	The device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of the control. It results in the more safe and reliable lift travel.
Down Over-speed Protection	When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety.
Upward Over-speed Protection Device	When the lift ups 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift.
Micro-touch Button for Car Call and Hall Call	Novel micro-touch button is used for operational panel command button in the car and landing calling button.
Floor and Direction Indicator Inside Car	The cars shows the lift floor location and current travel direction.
Floor and Direction Indicator Hall	The landing shows the lift floor location and current travel direction.
Emergency Car Lighting	Emergency car lighting automatically activated once power failure.
Inching Running	When the lift enters into emergency electric operation, the car travels at low speed inching running.
Five Way Intercom	Communication amid car, car top, lift machine room and rescue duty room through walkie-talkie.
Bell	In emergency conditions, if bell button above car operation is continuously pressed, eletric bell rings on the top of the car.
Fire Return	If you start key switch in main landing or monitor screen, all the callings will be cancelled. The lift directly and immediately drives to the designated rescue landing and automatically opens the door.
Car Light Automatic Shut-off	If there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save energy.
Locking Return	The lift can be called to main landing (after finishing the service) through the key switch and automatically exists the service.

Certificates

 

 

 

ISO 9001

ISO 14001

OHSAS 18000

 Manufacture License of Special Equipment, People's Republic of China

Installation, Alteration, Repair & Maintenance License of Special Equipment, People's Republic of China

 

Installation:

 

We are not responsible for the installation for overseas customers, but, we are happy to send our engineers to accomplish the installation at customers' costs if it is really needed. We are not recommend our esteemed customer to adopt in this way, as the cost is really huge indeed.

 

Agent Wanted:

 

We are always looking for qualified/experienced elevator distributors to cooperate with us on long term basis. We are happy to provide distributors our promotion price as reward for the cooperation. International agent business and/or OEM manufacturing, both are welcome to our company.

 

Aftersales Services:

 

We guarantee that all the spare parts and/or accessories were original quality products. We guarantee that all the production and inspection in our factory were strictly carried out according to Chinese Standard GB7588-2003 & Europe Standard EN-81.

 

If there is any fault/defect product or accessories in our company, we are able to issue a replacement/substituent immediately on the basis of DDP payment terms.

 

 

Home Elevator